Toshiba Qosmio X300 - Manual (Page 54)

User’s Manual 3-3
Getting Started
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor (3-pin plug)
2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the
back of the computer.
Connecting the adaptor to the computer
3. Plug the power cord into a live wall outlet - the Battery and DC IN
indicators on the front of the computer should glow.
Opening the display
The computer's display panel can be opened to a wide range of angles for
optimal viewing.
Lift up the display panel of the computer and adjust the panel to create a
comfortable viewing angle.
While holding down the palm rest with one hand so that the main body of
the computer is not raised, slowly lift the display panel - this will allow the
angle of the display panel to be adjusted to provide optimum clarity.
Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
DC in 19V jack