Toshiba Qosmio X300 User Manual

Page 193

User’s Manual

C-4

Wireless LAN

■

For wireless clients that operate in a Wireless LAN Infrastructure, the

Wireless LAN module will automatically start operation at the channel

identified by the Wireless LAN Access Point. When roaming between

different access points the station can dynamically switch to another

channel if required.

■

For Wireless LAN modules installed in wireless clients that operating in

a peer-to-peer mode, the module will use the default channel 10.

■

In a Wireless LAN Access Point, the Wireless LAN module will use the

factory-set default channel (printed in bold), unless the LAN

Administrator selected a different channel when configuring the

Wireless LAN Access Point device.