Installing a memory module – Toshiba Satellite P845 User Manual
Page 88
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.
Click Power in the Settings charm, and then click Shut down while
holding down the SHIFT key - ensure that the Power indicator is off.
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
3.
Close the display panel.
4.
Turn the computer upside down and remove the battery pack (refer to
5.
Loosen the screws securing the memory module cover in place -
please note that the screws are attached to the cover in order to
prevent them from being lost.
On some models, you need to remove the protection rubber before
loosening the screws.
6.
Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-11 Removing the memory module cover
2
1
1. Screws
2. Memory module cover
Product appearance depends on the model you purchased.
User's Manual
4-31