Toshiba Satellite P845 - Manual (Page 113)

When using the Sleep and Music function, connect the computer and
Audio device with an audio cable.
When using the Sleep and Music function, the volume level can not be
changed from the computer.
The volume adjustment and mute setting might be different between
Windows mode and Sleep and Music mode. Before connecting the
audio device to the computer, turn down the volume of the audio
device. Sound quality may also be different.
Use the Sleep and Music function with the display open.
Move the slider to enable or disable this function.
Function under Battery Mode
This utility can be used to enable/disable Sleep and Charge or Sleep and
Music under battery mode.
Move the slider to enable or disable this function.
Enabled Enables Sleep and Charge or Sleep and Music
function under battery mode.
Disabled Enables Sleep and Charge or Sleep and Music
function only when the AC adaptor is connected.
Lower limit of
remaining battery life Specifies the lower limit of remaining battery life
by moving the slider bar. If the remaining battery
life falls below the setting, the Sleep and Charge
or Sleep and Music function will be stopped.
This setting is only available when the Function
under Battery Mode is enabled.
HDD Protection
This tab lets you set up HDD Protection utility.
Please refer to the
Using the Hard Disk Drive (HDD) Protection section for
more information.
Display
This tab lets you customize your computer’s display settings for either the
internal display or an external monitor.
Power On Display
This option allows you to select the display to be used when the computer
is started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
User's Manual 5-11