Power-up modes, Panel power off/on, System automatic sleep/hibernation – Toshiba Equium L40 User Manual
Page 86
User’s Manual
6-10
Power and Power-Up Modes
3. Hold the battery pack so that the label faces down and the connectors
on the battery face the connectors on the computer.
4. Put the battery into the battery bay until the latch clicks into place.
Power-up modes
The computer has three power-up modes:
■
Hibernation (saves data in memory to the hard disk)
■
Sleep (power remains on, maintaining the data in memory, but the CPU
and all other devices effectively enter a ‘sleep’ mode)
■
Boot (does not save data in memory)
Panel power off/on
This feature makes the computer to enter Hibernation when the display
panel is closed and turns it back on when the display panel is opened.
System automatic Sleep/Hibernation
This feature automatically turns off the system in Sleep or Hibernation
mode if the computer is not used for a set duration.
Refer to
, in Chapter 1,
for an
explanation of how to set the duration.
2
1
Refer also to the section
in Chapter 3,
.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.