Fingerprint sensor expresscard – Toshiba Satellite Pro U400 User Manual
Page 145
User’s Manual
9-16
Troubleshooting
Fingerprint Sensor
ExpressCard
Problem
Procedure
Reading of the
fingerprint was not
successful
Please try again using the correct posture. Refer
to
Using the fingerprint sensor (optional)
in
Chapter 4,
.
Try the recognition process again using another
enrolled finger.
The fingerprint cannot
be read due to injuries
to the finger
Try the recognition process again using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.
Fingerprint Pre-OS
feature or Single Sign
On feature cannot be
enabled
Please use TOSHIBA HW Setup to register the
User Password if it was not registered.
Fingerprint Pre-OS
feature does not work
Make sure you have enroll finger in windows
account.
Set the User Password by using TOSHIBA HW
Setup and restart the system.
Make sure place a checkmark in "Enable Pre-OS
Fingerprint Authentication" on the TrueSuite
Access Manager setting.
Problem
Procedure
ExpressCard error
occurs
Reseat the ExpressCard to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
Check the card’s documentation.
If problems persist, contact your dealer.