Toshiba HDR5010 - Manual (Page 28)

‘Manual’ This is displayed if you manually set a timer (see next page). The
Channel, Start time, End time, Change/Delete & Playback can all
be changed.
Change/Delete:
‘Allowed’
The timer can be changed or deleted.
‘Disallowed’ The PIN (default = 0000)* must be entered correctly before the timer
can be changed/deleted.
A symbol will be added to recordings that have been protected from change or deletion.
Playback:
‘Allowed’
The recording can be viewed (even if it was recorded from a locked
channel).
‘Disallowed’ The recording can not be viewed. The PIN (default = 0000)* must be
entered correctly before the recording can be viewed.
A symbol will be added to recordings that have been protected from playback.
‘Use parental
settings’
If the recording is made from a locked channel or if the programme
is parentally advised, the PIN must be entered correctly before the
recording can be viewed (see Parental Control on page 38).
Manually Setting a Timer
1. With the ‘Timers’ menu displayed, press the [YELLoW] button.
2. Press [ ] or [ ] to highlight the required setting. Use the [ / / / ] and [0]-[9] buttons
to make changes. All settings apart from Type can be changed.
3. Press the [GREEn] button to save the changes.
*The PIN can be changed using the Set PIN option in the Parental Control menu. See page 38 for more information.
Modifying Timers
Using your Digital TV recorder
28
HDR5010 User Guide.indb 28 22/07/2010 10:38