Toshiba Equium P300 - Manual (Page 93)

User’s Manual 4-20
Operating Basics
■ Always copy data from the hard disk drive to the CD-R/-RW,DVD-R/
-RW/-RAM or DVD+R/+RW disc. Do not use cut-and-paste. The
original data will be lost if there is a write error.
Disclaimer (DVD Super Multi drive or HD DVD-ROM drive supporting
DVD±R DL)
TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may
be caused by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R/RW or DVD-R/
-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with
this product, or for any business profit loss or business interruption that
may be caused by the change or loss of the recorded contents.
■ Damage that may be caused by using third party equipment or
software. Given the technological limitations of current optical disc
writing drives, you may experience unexpected writing or rewriting
errors due to disc quality or problems with hardware devices. Also, it is
a good idea to make two or more copies of important data, in case of
undesired change or loss of the recorded contents.
Writing CD/DVD/HD DVDs on HD DVD-RW drives
You can use the HD DVD-RW drive to write data to either CD-R or CD-RW,
DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer),
DVD-RAM, HD DVD-R, HD DVD-R(Dual layer) discs. This computer is
provided with TOSHIBA Disc Creator and Ulead
®
DVD MovieFactory
®
to
allow for the writing to CD, DVD and HD DVD media.
For further information on TOSHIBA Disc Creator and Ulead
®
DVD
MovieFactory
®
, please refer to each software's online manual or online
helps. Refer to HD DVD Guide for information on accessing the online
manual or online help.
The optical drive installed on this computer cannot write multiple sessions
on HD DVD-RW disc sessions. Once a disc has been written to once, it will
be finalized. Once finalized, no further writing to the disc will be possible
regardless of what portion of the total disc capacity was used.
■ Please refer to the Writable discs, Chapter 2 for details about the types
of writable CD, DVD and HD DVD discs that can be supported by this
computer.
■ Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
■ CD-R/RW media cannot be accessed using the Create CD/DVD option
in Media Center.
■ To write data to CD-R/RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.