Usb sleep and charge function – Toshiba Equium P300 User Manual
Page 131
User’s Manual
7-3
HW Setup
USB
USB Keyboard/Mouse/FDD Legacy Emulation
Use this option to enable or disable Legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and FDD by setting the Legacy USB Support to enable.
USB Sleep and Charge function
This section describes the setting for "USB Sleep and Charge function".
For more information, please refer to the
section in Chapter 4.
The default setting in BIOS Setup is [Disabled]. Changing the setting to
[Enabled] enables the use of this function.
There are two modes, Mode -1 and Mode-2 in [Enabled]. For normal use,
set the setting to Mode-1.
LAN
Built-in LAN
This feature enables or disables the Built-in LAN.
Disabled
Disables the Wake-up on Keyboard function
(Default).
If the function does not work with Mode-1 setting, charge it to Mode-2.
Some external devices may not be able to use this function in either mode.
When this happens, change the setting to [Disabled].
Enabled (Mode-1)
Enables USB Sleep and Charge function.
Enabled (Mode-2)
Enables USB Sleep and Charge function.
Disabled
Disables USB Sleep and Charge function
(Default).
Enabled
Enables Built-in LAN function (Default).
Disabled
Disables Built-in LAN function.