Bosch HES236U - Manual (Page 21)

Page 16
5. Touch TIME pad. TIMER 1 (2) will flash in display.
6. Turn knob to clear TIMER 1 (2).
7. To clear TIMER 1 (2), push TIME.
8. If TIME pad is not touched, oven will beep and display will
continue flashing.
Clearing the Timer/s
1. Touch TIME once.
2. Turn knob to select the appropriate timer. Touch TIME.
3. Turn knob once in clockwise direction and CLEAR TIMER
will flash in display.
4. Push TIME.
3. Turn knob to the right to increase by 1 minute increments or
left to decrease by 1 minute increments. Continue to rotate knob
until desired minutes are displayed.
If setting only minutes, press START. Otherwise, continue to
step 4.
4. Touch TIME again and the hours will flash.
2. Turn counterclockwise and TIMER 2 will be displayed. Select
TIMER 1 or 2, then push TIME. SET TIMER 1 (2) appears
in display. Minutes flash.
Setting the Timer/s
1. Touch TIME and TIMER 1 will be displayed.
Changing the Timer/s
1. Touch TIME. TIMER 1 will appear in display. Select either TIMER
1 or 2.
Using the Timer/s
CANCELLING
If operation is not completed, the oven will
beep periodically as a reminder to set time.
Push Off to exit the TIMER mode.
Selecting Off when not in a setting mode will
stop oven function.
CLEAR TIMER 1 CLEAR TIMER 1 CLEAR TIMER 1 CLEAR TIMER 1 CLEAR TIMER 1
0: 00 0: 00 0: 00 0: 00 0: 00
TIMER 1 TIMER 1 TIMER 1 TIMER 1 TIMER 1
0: 00 : 00 : 00 : 00 : 00
AM
5. Turn knob to the right to increase by 1 hour increments or
left to decrease by 1 hour increments until desired hours are
displayed.
6. Touch TIME again. The TIMER is now set.
7. If TIME or START is not touched, oven will begin beeping and
timer display will begin flashing.
TIMER 1 TIMER 1 TIMER 1 TIMER 1 TIMER 1
0: 00 0: 00 0: 00 0: 00 0: 00
2. Push TIME. RESET TIMER 1 (2) appears in the display.
Minute digits flash.
3. Turn knob clockwise or counter-clockwise to change minutes.
4. Touch TIME again and hour digits will flash.
5. Turn knob clockwise or counter-clockwise to change hours.
6. Touch TIME and new time is set.
SET SET SET SET SET TIMER 2 TIMER 2 TIMER 2 TIMER 2 TIMER 2
1: 00 : 00 : 00 : 00 : 00
HR:MIN
TIMER
SET SET SET SET SET TIMER 2 TIMER 2 TIMER 2 TIMER 2 TIMER 2
2: 2: 2: 2: 2: 02
HR:MIN
TIMER
PM
When the specified time has elapsed, the control beeps. TIMER 1
(2) END flashes in the display.
1. Touch TIME to return to main screen.