beautypg.com

Bose VCS 10 Series II User Manual

Page 12

background image

10 October 22, 2001 AM19464_02_V.pdf

English

Setting Up

Note:

If you want to use other speaker cable or need to lengthen the supplied cables, call

Bose

®

customer service. See page 15 for descriptions of applicable accessories. The cus-

tomer service numbers can be found inside the back cover.

Connect the Acoustimass

®

module to the center and front cube

speakers

Use the 20 foot (6 m) cable with three pairs of wires to connect the Acoustimass module to
the center and front cube speakers.

Note:

You can use any cube array in any position.

1. Connect the wire pair marked CENTER to the cube array you have placed in the center

speaker position. Press the terminal tab on the back of each speaker. Then, insert the
marked wire into the red terminal and the plain wire into the black terminal. Release the tab
to secure the wires in place. See Figure 8.

2. Connect the wire pair marked RIGHT to the cube array you have placed in the right front

position (to the right of the TV as you face it) in the same way.

3. Connect the wire pair marked LEFT to the cube array you have placed in the left front

position (to the left of the TV as you face it).

Figure 8

Making cube speaker connec-
tions

Marked wire

to red terminal