Bully Dog 153001 - Manual (Page 5)

4
6. Remove the plate that secures the solenoids shown in picture #3.
7. Remove all the remaining bolts that hold the valve body together and dismantle it. When separating the valve
body pull evenly on each side being carefull not to break the attaching dowles. Do not use any pry bars or tools
to separate the valve body.
8. You now have the valve body completely dismantled and are ready to start the modifications. See the steps
and diagrams in the next section for details.
removing Valve Body
PICTURE 3
PICTURE 4