Regulatory statements, Ce compliance working environment, Ce compliance – Toshiba JournE Scan User Manual
Page 18: Working environment

18
User’s Manual
EN
Regulatory Statements
CE Compliance
This product is CE marked in accordance with the requirements of the applicable
EU Directives. Responsible for CE-marking is Toshiba Europe GmbH,
Hammfelddamm 8, 41460 Neuss, Germany. A copy of the official Declaration of
Conformity can be obtained from following website:
http://epps.toshiba-teg.com/
Working Environment
The Electromagnetic Compliance (EMC) of this product has been verified typically
for this product category for a so called Residential, Commercial & Light Industry
Environment. Any other working environment has not been verified by Toshiba
and the use of this product in these working environments is maybe restricted or
cannot be recommended. Possible consequences of the use of this product in
non verified working environments can be: Disturbances of other products or of
this product in the nearby surrounding area with temporarily malfunction or data
loss/corruption as result. Example of non verified working environments and
related advices:
n
Industrial environment (e.g. where 3-phase 380V mains is being used mainly):
Danger of disturbances of this product due to possible strong electromagnetic
fields especially near to big machinery or power units.
n
Medical environment: The compliance to the Medical Product Directive
has not been verified by Toshiba, therefore this product cannot be used as a
medical product without further verification. The use in usual office
environments e.g. in hospitals should be no problem if there is no restriction by
the responsible administration.
n
Automotive environment: Please search the owner instructions of the related
vehicle for advices regarding the use of this product (category).
n
Aviation environment: Please follow the instructions of the flight personnel
regarding restrictions of use.
UM_EU_Scan_1108.book Page 18 Monday, December 15, 2008 12:15 PM