Toshiba JournE Scan - Manual (Page 13)

User’s Manual 13
EN
Care and Maintenance
Cleaning the Scanner
In order to maintain the scanned image quality and prevent dust accumulation, it
is recommended that you clean the scanner (outer casing, image sensor and
roller inside the scanner) regularly (about every 150-200 scans) using only the
recommended and supplied tools.
CAUTION: Do not use any tools other than the supplied ones to clean the
image sensor and roller inside the scanner. Otherwise they will be permanently
damaged. Make sure that there is no visible dust on the cleaning tool before
using.
Cleaning the roller
Original
Scanned image (over-
cropped)
1. Connect the power supply to the scanner.
2. With scanner power off, press and hold the Power button for 5 seconds. The
scanner will enter cleaning mode.
3. Insert the supplied roller cleaning sheet as shown.
Note the direction of the black sponge on the sheet
when inserting.
4. The cleaning sheet will be brought into the feeding slot automatically, and the
cleaning process will begin.
UM_EU_Scan_1108.book Page 13 Monday, December 15, 2008 12:15 PM