Belkin F1DP116Gea - Manual (Page 58)

54
Performance Settings (Bandwidth)
You can adjust the bandwidth settings on the Switch to give you the desired
compression and color-support levels for your remote sessions.
To change the bandwidth settings:
1. In the quick-access toolbar, click on . The Performance-Settings box
will appear (see Fig. 19).
Fig. 19 Performance-Settings Box
2. Select one of the following bandwidth options:
• Adaptive— Automatically adapts to the best compression and colors
• Adaptive— • Adaptive—
based on activity.
• Low— Provides high compression and 16-color support.
• Medium— Provides medium compression and 256-color support.
Medium is recommended when accessing the Switch over an
Internet connection.
• High— Provides low compression and high, 16-bit color support. This
setting provides optimal performance when working on a LAN.
• Custom— Allows you to select your own compression and • Custom— • Custom—
color-support levels. Choose between Low, Medium, and High
compression, and 16-, 256-, and High (16-bit) color support.
3. When finished, click “OK” to save the setting. The screen of the last
accessed target server will appear.
Using the Switch from a Remote Console