Remote installation, Step 5 switch configuration – Belkin F1DP116Gea User Manual
Page 40
36
Step 5 Switch Configuration
The Switch-Configuration page allows you to specify the KVM Switches
daisy-chained to the SMB KVM-over-IP Switch, and to name all connected
servers. To open the page, click “Switch Configuration” under “Administration” in
the far-left column (see Fig. 4).
Fig. 4 Switch-Configuration Page
Note: By default, the Switch-Configuration page assumes that all daisy-chained
KVM Switches have 16 server ports. The page shows 256 available server-name
fields, which is the maximum number of servers supported by one daisy-chain
configuration (one SMB KVM-over-IP Switch daisy-chained with 15 additional
KVM Switches).
Remote Installation
This manual is related to the following products: