Pioneer F-F6-J - Manual (Page 9)

Connections 02
9
En
English
Français
Deutsch
Nederlands
Italiano
Español
Connecting analog audio
sources
• Use the RCA/phono jack audio cable to
connect this unit’s LINE OUT connectors
to the analog input connectors of an
amplifier.
Connecting digital audio sources
• If you want to enjoy listening to the digital
output audio of the DAB, connect to an
amplifier supplied with a digital coaxial or
optical input.
• Digital audio out: Connections with
equipment having a digital input such as
an amplifier or an MD recorder. The digital
audio output terminal of this unit (either
DIGITAL OUT OPTICAL or DIGITAL OUT
COAXIAL) should be connected with the
digital input terminals of an amplifier, MD
recorder, or other component (
OPTICAL or
COAXIAL).
Connecting RDI
The RDI (Receiver Data Interface) optical
connector provides access to multiplex data.
This is used to connect to a computer or other
external data source in order to access
services that are expected to be added in the
future.
These services may not yet be provided in your
reception area.
Plugging in
Make sure to complete all connections before
connecting to an AC outlet.
• Connect the power cord to the AC inlet
(AC IN) on the rear panel of the tuner, then
plug into a AC outlet.
CONTROL
LINEOUT
R
OUT IN
L RDI OUT DIGITAL OUT
COAXIAL OPTICAL OPTICAL
ANTENNA
DAB
Amplifier
To analog input
CONTROL
LINEOUT
R
OUT IN
L RDI OUT DIGITAL OUT
COAXIAL OPTICAL OPTICAL
ANTENNA
DAB
Amplifier with built in D/A converter
To digital audio
input (optical)
To digital audio
input (coaxial)
CONTROL
OUT IN
RDI OUT DIGITAL OUT
COAXIAL OPTICAL OPTICAL
To digital audio
input (optical)
01_F-F6_EN.book 9 ページ ２００７年９月３日 月曜日 午後１時５８分