Pioneer DEH-P9400MP - Manual (Page 51)

U
sing loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1. Press AUDIO and then press NEXT to dis-
play “LOUD”.
Press NEXT until “LOUD” appears.
2. Press LOUD to select the loudness mode.
3. Press LOUD to turn the loudness on.
“LOUDNESS ON” appears in the display.
• Press LOUD again to turn loudness off.
U
sing sound field control,
octaver and BBE R sound
SFC (sound field control) incorporates four pro-
grams reproducing the typical sound field of a
studio, club, concert hall or dome. This function
makes it possible to reproduce the realistic
sound fields of the four programs in your car.
Octaver makes the bass sound louder.
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and high-
range boost for the delay of the high-frequency
components and the amplitude deviation occur-
ring during playback. This function makes it
possible to reproduce the dynamic sound field
as if you are listening to a live performance.
Note:
• Manufactured under license from BBE Sound, Inc.
The mark BBE is a trademark of BBE Sound, Inc.
• SFC, octaver and BBE are automatically set to OFF
when you receive traffic announcements.
Recalling sound field programs
1. Press AUDIO and then press SFC to
select the sound field control mode.
2. Press the corresponding button to select
the desired sound field program.
Button Effect
STUDIO Studio
CLUB Club
HALL Concert hall
DOME Dome
OCT Octaver 1 and 2
BBE BBE
• Press the same button again to cancel the
selected sound field program.
Switching the octaver setting
You can switch the octaver setting.
“OCTAVER2” has a stronger effect than
“OCTAVER1”.
1. Press AUDIO and SFC and then press
OCT to select octaver.
2. Press
5 5 or ∞ ∞ to switch the octaver set-
ting.
Each press of
5
or
∞
switches the octaver
setting between 1 and 2.
Adjusting BBE sound level
With BBE sound processing technology, you
can adjust the level of BBE.
1. Press AUDIO and SFC and then press
BBE to select BBE.
2. Press
5 5 or ∞ ∞ to adjust the level of BBE.
Each press of
5
or
∞
increases or decreas-
es the level of BBE.
• “+4” – “–4” is displayed as the level is
increased or decreased.
50
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS