Pioneer DEH-P9400MP - Manual (Page 38)

37
DAB Tuner
D
ynamic label function
Displaying dynamic labels
1. Press NEXT to display “D.TEXT”.
Press NEXT until “D.TEXT” appears.
2. Press D.TEXT to switch to the dynamic
label mode.
3. Press
2 2 or 3 3 to recall the three latest
dynamic label broadcasts from the
tuner’s memory.
Pressing
2
or
3
switches between the four
dynamic label data displays.
Note:
• Press BAND to cancel the dynamic label mode.
• When no dynamic label is currently being received,
“No text” is displayed.
• If there is no dynamic label data stored in the tuner,
2/3 do not operate.
• If you do not operate the function within about 60
seconds, the display is automatically returned.
Storing a dynamic label
You can store data from up to six dynamic label
transmissions under the buttons MEMO1 –
MEMO6.
1. Select the dynamic label you want to
store in memory.
Refer to “Displaying dynamic labels” on this
page.
2. Press and hold any of the buttons
MEMO1 – MEMO6 until “DAB memo”
appears to store the desired dynamic
label.
The dynamic label is stored in memory
under the selected button.
Recalling a dynamic label
1. Press NEXT to display “D.TEXT”.
Press NEXT until “D.TEXT” appears.
2. Press D.TEXT to switch to the dynamic
label mode.
3. Press any of the buttons MEMO1 –
MEMO6 to recall the dynamic label preset
under that button.
D
AB tuner function menu
The DAB tuner function menu has the following
functions:
q AS (announcement support)
For operation of the announcement support,
refer to “Setting the announcement support
interruption” on page 38.
w chLIST (preset service list)
For operation of the preset service list, refer
to “Selecting services from the preset ser-
vice list” on page 38.
e S.LIST (available service list)
For operation of the available service list,
refer to “Selecting services from the avail-
able service list” on page 38.
r PTY (available PTY search)
For operation of the available PTY search,
refer to “Searching the available PTY” on
page 38.
t P/2ND (primary/secondary)
Press P/2ND repeatedly to switch to the next
service component.
y SF (service follow)
Press SF repeatedly to turn SF on or off.
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
q w e r t y