Pioneer CNDV-50MT - Manual (Page 105)

103
Chapter 9
Operating Your Navigation System with Voice
NAVI/AV
3
After confirming the location, say “Yes”.
Replying “Yes” starts a route calculation of the
place displayed as the destination (or way
point) on the map.
❒ If you say “No”, the map of that place can
be displayed.
➲ Searching the destination by map ➞
Page 27
Tips for Voice Operation
For your voice commands to be correctly recog-
nised and interpreted, ensure that conditions are
suitable for recognition.
Reduce the volume setting on your vehicle
audio system
➲ The sound volume is automatically reduced
during voice operation ➞ Page 53
Close the vehicle windows
Please note that wind through the vehicle win-
dow or miscellaneous noise from outside the
vehicle can interfere with voice operation.
Position the microphone carefully
For optimum pick-up, the microphone should be
fixed at a suitable distance directly in front of the
driver.
❒ In order to operate the navigation unit by
voice, you need the microphone kit (CD-VC1),
which is sold separately. Please refer to the
“Owner’s Manual” for the microphone kit.
Pause before giving a command
Speaking too soon may cause the recognition to
fail.
Pronounce your commands carefully
Speak slowly, deliberately and clearly.