Tuner listening to the radio 17, Listening to the radio, Tuner – Pioneer DEH-P70BT User Manual

Page 17

Listening to the radio

7 8

9 a

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 21).

1 Source icon

Shows which source has been selected.

2 Preset number indicator

Shows which preset has been selected.

3 LOC indicator

Shows when local seek tuning is on.

4 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

5 Frequency indicator

Shows to which frequency the tuner is

tuned.

6 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

7 Signal level indicator

Shows the signal strength of cellular phone.

! Signal level indicator may differ from the

actual signal level.

8 Battery strength indicator

Shows the battery strength of cellular

phone.

! Battery strength indicator may differ

from the actual battery strength.

9 News ( ) indicator

Shows when the set news program is re-

ceived.

a TP (

) indicator

Shows when a TP station is tuned in.

1 Press SOURCE to select the tuner.

Press SOURCE until you see Tuner displayed.

2 Press BAND to select a band.

Press BAND until the desired band is dis-

played, FM1, FM2, FM3 for FM or MW/LW.

3 To performmanual tuning, push

Multi-Control left or right.

The frequencies move up or down step by

step.

4 To performseek tuning, push and hold

Multi-Control left or right for about one

second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pushing
Multi-Control left or right.
# If you push and hold Multi-Control left or
right you can skip stations. Seek tuning starts as
soon as you release Multi-Control.

Tuner

English

Section