Removing the front panel 10, Attaching the front panel 10, Resetting the microprocessor 10 – Pioneer DEH-P70BT User Manual

Page 10: Resetting the microprocessor, Before you start, Removing the front panel, Attaching the front panel

! You can turn off the warning tone. See

Important

! Never use force or grip the display and the

buttons too tightly when removing or attach-
ing.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press OPEN to open the front panel.

2 Grip the left side of the front panel and

pull it gently outward.

Take care not to grip it too tightly or to drop

the front panel and protect it from contact

with water or other fluids to prevent perma-

nent damage.

3 Put the front panel into the protective

case provided for safe keeping.

Attaching the front panel

% Replace the front panel by holding it

upright to the unit and clipping it securely

into the mounting hooks.

Resetting the microprocessor

The microprocessor must be reset under the

following conditions:

! Prior to using this unit for the first time

after installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

1 Remove the front panel.

2 Press RESET with a pen tip or other

pointed instrument.

RESET button

3 Replace the front panel by clipping it

into place.

4 Turn the ignition to ACC or ON and

wait until the feature demo appears in the

display.

Resetting of the microprocessor is now com-

pleted.

Before You Start

Section