Pioneer DJS User Manual
Page 17
DJS Ver. 1.000
17
1
Getting the Most out of DJS
DJ System
When Using an External Mixer
You can use just DJS’s player functions (Player A, Player B, List
Player) without using the DJS mixer functions. When doing so,
you can output the audio of the 3 players to an external mixer. To
do this, your computer needs to have a minimum of 2 or 3+
internal or external audio output systems. If the computer you are
using only has 1 audio output system, you will have to install
additional audio devices, such as sound cards.
Then connect each of the audio outputs (for Player A, Player B
&/or List Player) from your computer to the external mixer and
connect the external mixer to the speakers and headphones.
Example of connections in a 3 audio output (sound card)
system
Switching to an External
Mixer
When DJS is initially installed, it is set
up for using the DJS mixer functions.
Consequently, if you do not wish to use
DJS’s mixer functions, use the
[Preference] screen to switch the
settings to using an external mixer.
‘9-4-1 Switching between Internal
Warning!
If you increase the number of
sound cards
Make the settings appropriate for the
audio output to the audio device, such
as a sound card, on the [Preference]
screen.
‘9-4-2 Selecting a Sound Card’
Sound Card
Speaker (Left)
Headphones
Computer
Speaker
(Right)
External Mixer