Pioneer CDJ-350 - Manual (Page 18)

DRB1508-C
En 18
18
Pitch bend
During playback, spin the outer section without touching
the top of the jog dial c.
The playing speed increases when spun clockwise, decreases when
spun counterclockwise. When spinning is stopped, playback returns
to the normal speed.
! When the jog mode is set to the CDJ mode, the same operation
can be performed by spinning the top of the jog dial.
Frame search
In the pause mode, spin the jog dial c.
The pause position can be moved in units of single frames.
! The position is moved in the direction of playback when the jog
dial is spun clockwise, in the reverse direction when it is spun
counterclockwise. The position moves 135 for one revolution of the
jog dial.
Super fast search
Spin the jog dial c while pressing [SEARCH m, n] 9.
The track is fast-forwarded/ fast-reversed in the direction in which the
jog dial is spun.
! This function is canceled when [SEARCH m, n] is released.
! When you stop the jog dial from spinning, normal playback
resumes.
! The fast-forward/ fast-reverse speed can be adjusted according to
the speed at which the jog dial is spun.
Super fast track search
When the jog dial c is spun while pressing [TRACK SEARCH o,
p
] 8, tracks are searched at high speed in the direction in which the
jog dial is spun.
Setting loops (loop and beat loop
part)
SEARCH
TRACK SEARCH IN/CUE OUT
OUT ADJUST HOT LOOP
RELOOP/EXIT BEAT LOOP
LOOP DIVIDE — +
VINYL MODE
TEMPO RANGE
LOOP
e
f h g
1 During playback, press [LOOP IN/ CUE (HOT LOOP)] e.
Loop In Point is set.
! This operation is not necessary if you have already set a Cue Point
as a Loop In Point.
2 Press [LOOP OUT (OUT ADJUST)] f.
The loop out point is set, and loop playback begins.
Fine-adjusting the loop out point (loop
out adjust)
1 During loop playback, press [LOOP OUT
(OUT ADJUST)] f.
[LOOP OUT (OUT ADJUST)] starts flashing quickly and [LOOP IN/ CUE
(HOT LOOP)] turns off.
The loop out point’s time is displayed on the main unit display.
2 Press [SEARCH m, n] 9.
The loop out point can be adjusted in units of single frames.
! The same operation is possible using the jog dial.
! The loop out point adjustment range is anywhere after the loop in
point.
3 Press [LOOP OUT (OUT ADJUST)] f.
Loop playback resumes.
! Loop playback also resumes if no operation is performed for over
10 seconds.
Canceling Loop playback (Loop Exit)
During loop playback, press [RELOOP/EXIT] g.
Playback continues beyond the Loop Out Point without returning to
the Loop In Point.
Returning to Loop playback (Reloop)
After canceling loop playback, press [RELOOP/EXIT] g
during playback.
The track returns to the previously set loop in point and loop playback
begins.
Dividing loops (Loop Divide)
During loop playback, press [BEAT LOOP (LOOP DIVIDE)] h.
The length of loop playback is divided in half each time [–] is pressed.
When [+] is pressed, the loop playback length returns to the original
length.
Returning to the loop in point (Hot Loop)
During loop playback, press [LOOP IN/ CUE (HOT LOOP)] e.
The track instantaneously returns to the set loop in point and loop
playback starts.
Setting loops automatically based on the
track’s tempo (Beat Loop)
In the play or pause mode, press [BEAT LOOP
(LOOP DIVIDE)] h.
The loop out point is set automatically according to the track’s tempo
(BPM) and loop playback starts.
! Loop playback cannot be performed properly if the BPM value is
not displayed.
Displaying track information
(browse section)
USB
STOP
SOURCE SELECT
MP3/AAC
WAV/AIFF
PLAYLIST
BPM
DISC
LOCK
BACK
SELECT PUSH
TIME MODE
AUTO CUE
DISPLAY
UTILITY
k
l
m
n
i
j
A.CUE
LOCK
16
REMAIN M S F TEMPO %
INFO
BROWSE
BPM