Pioneer PDP-436RXE - Manual (Page 41)

41
En
Using the Teletext Functions 11
English
Using the Teletext Functions
What is Teletext?
Teletext broadcasts pages of information and entertainment to
specially equipped television sets. Your Plasma Display System
receives Teletext signals broadcast by TV networks, and
decodes them into graphical format for viewing. News,
weather and sports information, stock exchange prices and
programme previews are among many services available.
Operating the Teletext basics
Turning on and off Teletext
1
Select a TV channel or external input source providing a
Teletext programme.
2
Press m to display the Teletext (full screen).
3
Press m again to display the Teletext on the right screen
and normal image on the left screen.
• Each time you press m, the screen switches as shown
to the left.
• If you select a programme with no Teletext signal,
“Cannot display Teletext.” appears.
Selecting and operating Teletext pages
Use the following remote control buttons to select and operate
Teletext pages.
Colour (RED/GREEN/YELLOW/BLUE):
You can select a group or block of pages displayed in the
coloured brackets at the bottom of the screen by pressing the
corresponding
colour (RED/GREEN/YELLOW/BLUE) on the
remote control unit.
0 – 9:
Directly select any page from 100 to 899 by using
0 – 9.
w/x:
Selects the next or previous page.
v:
Each time you press v, the teletext image switches as shown
below.
k:
To display hidden information such as an answer to a quiz,
press
k.
• Press k again to hide the information.
:
To stop updating Teletext pages, press .
• Press again to release the hold mode.
l:
Displays an Index page for the CEEFAX/FLOF format. Displays
a TOP Over View page for the TOP format.
NOTE
• Before displaying the Teletext, return the screen to the
single-screen mode.
TELETEXT
TELETEXT
Upper half
Lower half
Full
PDP-436RXE.book Page 41 Thursday, September 29, 2005 10:37 AM