Pioneer PDP-436RXE - Manual (Page 30)

30
En
Basic Adjustment Settings 08
Eliminating noise from images
1
Press HOME MENU.
2
Select “Picture” ( / then ENTER).
3
Select “Pro Adjust” ( / then ENTER).
4
Select “NR” ( / then ENTER).
5
Select an item to be adjusted ( / then ENTER).
• You can select “DNR” or “MPEG NR”.
6
Select the desired parameter ( / then ENTER).
7
Press HOME MENU to exit the menu.
Using the Dynamic Range Expander (DRE)
functions
1
Press HOME MENU.
2
Select “Picture” ( / then ENTER).
3
Select “Pro Adjust” ( / then ENTER).
4
Select “DRE” ( / then ENTER).
5
Select an item to be adjusted ( / then ENTER).
• You can select “Dynamic Contrast”, “Black Level”, “ACL”
or “Gamma”.
6
Select the desired parameter ( / then ENTER).
7
Press HOME MENU to exit the menu.
Using the 3DYC and I-P Mode
1
Press HOME MENU.
2
Select “Picture” ( / then ENTER).
3
Select “Pro Adjust” ( / then ENTER).
4
Select “Others” ( / then ENTER).
5
Select an item to be adjusted ( / then ENTER).
• You can select “3DYC” or “I-P Mode”.
6
Select the desired parameter ( / then ENTER).
7
Press HOME MENU to exit the menu.
NOTE
• For the 3DYC, the individual parameters are selectable only
when:
You have selected INPUT 1, 2, or 3 as the input source and
“Video” as the input signal type (page 33); or
You have selected INPUT 4 as the input source and have not
connected a S-Video cable; or You have selected the
analogue tuner.
The 3DYC setting is ineffective when SECAM, PAL60, or
4.43NTSC signals are input.
• For the I-P Mode, the individual parameters are not
selectable for the following input signals:
480p, 720p@60Hz, 576p, 720p@50Hz, 1080p@24Hz.
DNR
Eliminates video noise for clean crisp images. The DNR stands for Digital
Noise Reduction.
Selections Off Deactivates the DNR.
High Enhanced DNR
Mid Standard DNR
Low Moderate DNR
MPEG NR
Eliminates mosquito noise from video images when a digital TV channel is
watched or a DVD is played, resulting in noise-free images.
Selections Off Deactivates the MPEG NR.
High Enhanced MPEG NR
Mid Standard MPEG NR
Low Moderate MPEG NR
Dynamic Contrast
Emphasises the contrast on images so that the difference between
brightness and darkness becomes more distinct.
Selections Off Deactivates the Dynamic Contrast.
High Enhanced Dynamic Contrast
Mid Standard Dynamic Contrast
Low Moderate Dynamic Contrast
Black Level
Emphasises dark portion on images so that the difference between
brightness and darkness becomes more distinct.
Selections Off Deactivates the Black Level.
On Activates the Black Level.
ACL
Performs such compensation that results in the optimum contrast
characteristics for images.
Selections Off Deactivates the ACL.
On Activates the ACL.
Gamma
Adjusts the gamma characteristics (image gradation characteristics).
Selections 1 Selects gamma characteristics 1.
2 Selects gamma characteristics 2.
3 Selects gamma characteristics 3.
3DYC
Optimises characteristics for separating brightness signals and colour
signals. This works for both video and still images.
Selections Off Deactivates the 3DYC.
High Enhanced 3DYC
Mid Standard 3DYC
Low Moderate 3DYC
I-P Mode
Perform optimum conversion from interlace signals to progressive
signals. This works for both video and still images.
Selections 1 Optimum for video images
2 Standard setting
3 Optimum for still images
PDP-436RXE.book Page 30 Thursday, September 29, 2005 10:37 AM