Multi language display setting, Adjusting the illumination color, Using the aux source – Pioneer DEH-P5900MP User Manual
Page 38: About aux connection method 38, Other functions

Multi language display setting
Text information such as title name, artist
name or comment can be recorded on a
WMA/MP3/WAV disc.
This unit can display them even if they are em-
bedded in either European language or Rus-
sian language.
! If embedded language and selected lan-
guage setting are not consistent with each
other, text information may not be dis-
played properly.
! Some characters may not be displayed
properly.
1
Press FUNCTION to select TITLE.
2
Press c or d to select the language.
EUR (European language)
—RUS (Russian
language)
Adjusting the illumination
color
Setting up of a color is performed by adjusting
the level of three colors such as red, green
and blue. Adjusted the illumination color set-
ting is memorized as
CUSTOM.
1
Press FUNCTION to select CUSTOM.
2
Press c or d to select the color to ad-
just.
RED (red)
—GREEN (green)—BLUE (blue)
3
Press a or b to adjust the level of color.
4 to 0 is displayed as the level is increased or
decreased.
4
Press BAND to return to the playback
display.
# CUSTOM setting is common to display and
button illumination.
Using the AUX source
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to
AUX1 or AUX2. The
relationship between
AUX1 and AUX2
sources is explained below.
About AUX connection method
You have two methods to connect auxiliary
equipments to this unit.
Stereo mini pin plug cable (AUX1)
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the
AUX input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to
AUX1.
IP-BUS-RCA interconnector (AUX2)
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’s manual.
# You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Other Functions
En
38
Section
10