Assembling the stand, English assembly procedure – Pioneer PDK-TS35A User Manual
Page 11
11
En
English
Assembly Procedure
1
Turn the base cover over so the underside is
facing up.
2
Insert the stand pipes into the base cover.
3
Tighten the screws
➀
(4 mm × 10 mm: silver)
to stabilize the stand pipes.
����������
����������
�����
�����
�������
�
�
����������������������
����������
����
����������
���������������
�������
�
�
����������������������
����
Assemble the stand with a soft sheet placed under the base
cover. If a sheet is not laid before assembly, the front surface
of the base cover may be scratched.
Assembling the Stand
4
After assembling the stand, attach the falling
prevention metal fittings with the installation
screws
➂
(M4 × 35 mm: black).
����������
��������������������
�
�
�������������������
�������������������
�������������
�����
����
����
Be sure not to attach the falling prevention metal fittings in the
reverse position.
���������������������
�������������������