Tp alarm function – Pioneer GEX-P700DAB User Manual
Page 19

7 Canceling Road Traffic Flash and Transport Flash interruptions part way through
• To cancel a Road Traffic Flash or Transport Flash interruption and return to
the original source, press the TA button during an Announcement interruption.
The announcement is canceled but the tuner remains in the TA mode until the TA button is
pressed again.
Note:
• You can also switch in order between interrupting Announcements. (Refer to “Switching
Interrupting Announcements” on the next page.)
TP Alarm Function
When the following conditions arise, the TP indicator “
” goes out, and after 30 sec-
onds, the TP Alarm beeps for 5 seconds, reminding you to select a Service Component
supporting Road Traffic Flash and Transport Flash.
• When Road Traffic Flash and Transport Flash interruption setting is ON.
• When the Service Follow Function is ON.
• When this unit (during DAB reception) cannot clearly receive a Service Component
supporting Road Traffic Flash and Transport Flash.
• When Head Unit RDS cannot receive a TP or enhanced other network’s TP station
broadcast.
• When listening to a DAB broadcast, after hearing the TP Alarm, you should
re-tune to a Service that supports Road Traffic Flash and Transport Flash if
you want to continue the possibility to receive them.
When listening to any other sources, 30 seconds after “
” is displayed before going out,
search automatically starts for a Service Component in that area that supports Road Traffic
Flash and Transport Flash.
18
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS