Pioneer AVIC-F250 - Manual (Page 16)

Black plate (16,1)
Resetting the microprocessor
CAUTION
Please refer to the related section before clearing.
The microprocessor must be reset under the
following conditions:
! Prior to using this product for the first time
after installation.
! If the product fails to operate properly.
! If there appear to be problems with the op-
eration of the system.
! When changing the combination of equip-
ment.
! When adding/removing additional pro-
ducts that connect to the navigation sys-
tem.
! If your vehicle position is shown on the
map with a significant positioning error.
% Press the reset button on this product
with a pointed object such as the tip of a
pen.
Reset button
<127075024473>16
Engb
16
Chapter
02 Introduction