Pioneer CDJ-2000NXS - Manual (Page 12)

12 En
Connections
! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
! Refer to the operating instructions for the component to be connected.
! Connect the power cord after all the connections between devices have been completed.
! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.
Descriptions of terminals
POWER
CONTROL
LINK
AUDIO OUT
R L
CONTROL DIGITAL
OUT
1 4 5 6 2 3
1 AUDIO OUT L/R terminals
Connect the audio cables (included) here.
2 CONTROL terminal
This is used to interconnect DJ players with a monaural mini phone
plug (Ø 3.5 mm) cable (commercially available) to send control
signals for relay playback.
= Connections for relay play (p.15)
3 AC IN
Connect this to a power outlet.
Connect the power cord after all the connections between devices
have been completed.
Be sure to use the included power cord.
4 DIGITAL OUT terminal
Connect a digital coaxial cable here.
5 LINK terminal
Connect the LAN cable (included) here.
6 USB port
Connect to a computer.
CAUTION
Operating the switches on this unit or the remote control (if supplied)
may turn off all the indicators as if the power plug were unplugged.
However, this conforms to the intended specifications and the power
supply is not disconnected. To shut off the power supply completely,
you need to unplug the power plug (a power disconnecting device)
from an AC outlet. Place this unit near an AC outlet with easy access
to the power plug (a power disconnecting device). Unplug the power
plug from an AC outlet when this unit will be left unused for a pro-
longed period. Otherwise, it may cause a fire.
Basic style
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
! For instructions on operating rekordbox, see rekordbox (Mac/Windows)’s operating instructions. The rekordbox (Mac/Windows) operating instruc-
tions can be viewed from the rekordbox (Mac/Windows) [Help] menu.
! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK
connections.
! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or
greater. Some switching hubs may not operate properly.
! A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.
! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g stan-
dards. Depending on the signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not
operate properly.