Pioneer DV-610AV-S - Manual (Page 52)

09
52
En
Standard TV users
If you have a standard TV, the TV Screen
setting (page 39) of this player should be set to
4:3 (Letter Box) or 4:3 (Pan & Scan) , depending
on which you prefer.
Set to 4:3 (Letter Box) , widescreen discs are
shown with black bars top and bottom.
Set to 4:3 (Pan & Scan) , widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Please note that many widescreen discs
override the player’s settings so that the disc is
shown in letter box format regardless of the
setting.
Note
• Using the 16:9 (Wide) or 16: 9
(Compressed) setting with a standard 4:3
TV, or either of the 4:3 settings with a
widescreen TV, will result in a distorted
picture.
Setting the TV system
The default setting of this player is AUTO , and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO . If you experience picture
distortion with some discs, set the TV system
to match your country or region’s system.
Doing this, however, may restrict the kinds of
disc you can watch. The table below shows
what kinds of disc are compatible with each
setting (
AUTO , NTSC and PAL ).
1 If the player is on, press  STANDBY/
ON to switch it to standby.
2 Using the front panel controls, hold
down  then press  STANDBY/ON to
switch the TV system.
The TV system changes as follows:
• AUTO

NTSC
• NTSC

PAL
• PAL

AUTO
Note
• You have to switch the player into standby
(press  STANDBY/ON) before each
change.
Disc Type
Player setting
Format NTSC PAL AUTO
DVD/
Super VCD/
Video CD/
DivX video/
WMV NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
CD/MP3/
WMA/
MPEG-4 AAC
/JPEG
no disc
— NTSC PAL
NTSC
or PAL
DV610AV_WV_EN.book 52 ページ ２００８年５月２２日 木曜日 午後３時４３分