Pioneer DV-610AV-S - Manual (Page 44)

08
44
En
Speakers settings
Audio Output Mode
• Default setting: 2 Channel
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set this
to
5.1 Channel ; if you connected only the
stereo outs, set to 2 Channel .
Note
• Even if you set Audio Output Mode to 5.1
Channel , you’ll only get sound from all
speakers when playing a 5.1 channel
multi-channel disc.
• When set to 5.1 Channel , only the front left/
right channels are output from the AUDIO
OUT (2ch) jacks. Change to 2 Channel if
you want to listen to downmixed stereo
audio (for example, because you are
listening through the TV’s built-in
speakers).
• When set to 5.1 Channel there is no digital
output when playing DVD-Audio.
• If you set to 2 Channel , Dolby Digital, DTS
and MPEG audio is mixed down to two
channels so you still hear all the audio
recorded on the disc. With DTS encoded
audio, you can choose how the signal is
downmixed to PCM audio. See DTS
Downmix on page 43 to change the
downmix setting.
• Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the
setting made here.
Setting Option What it means
Audio Output
Mode 2 Channel The player outputs analog audio in stereo only. See
also Audio Output Mode below.
5.1 Channel The player outputs 5.1 channel analog audio. See
also Audio Output Mode below.
Speaker Distance – Specify the distance of your speakers from your
listening position. See also Speaker Distance on
page 48.
Speaker
Installation – Specify the number and size of speakers in your
system. See also Speaker Installation on page 49.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
2 Channel
5.1 Channel
Initial Settings
DV610AV_WV_EN.book 44 ページ ２００８年５月２２日 木曜日 午後３時４３分