Canceling a registered menu 11, About guide information, Using bluetooth telephone – Pioneer MVH-7300 User Manual
Page 11: Setting up for hands-free phoning 11, Basic operations 11, Operating this unit, Canceling a registered menu, Setting up for hands-free phoning, Basic operations

Canceling a Registered Menu
1
Display the custom menu and choose a
registered menu.
Refer to Basic menu operations on page 9.
2
Push and hold M.C. right to cancel the
registered menu.
About guide information
This unit displays guide information on how to
use
M.C. for each function.
1
Display the system menu.
Refer to Basic menu operations on page 9.
2
Use M.C. to select the Guide Info.
Turn to change the menu option. Press to se-
lect.
Guide information is displayed.
Operation
Turn
M.C.
Push
M.C. up or down.
Push
M.C. left or right.
Press
M.C.
Press and hold
M.C.
Push
M.C. up.
Push
M.C. down.
Push and hold
M.C. up.
# Press M.C. to display the next page.
Using Bluetooth telephone
This function is available only for MVH-8300BT.
Important
! Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
! Operations may vary depending on the kind of
cellular phone.
! Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe place
when using these advanced operations.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1 Connection
Operate the Bluetooth telephone connection
menu. Refer to Connection menu operation on
page 25.
2 Function settings
Operate the Bluetooth telephone function menu.
Refer to Phone menu operation on page 26.
Basic operations
Making a phone call
1 Refer to Phone menu operation on page 26.
Answering an incoming call
1 When a call is received, press M.C.
! You can also perform this operation by push-
ing
M.C. up.
Ending a call
1 Press M.C.
Rejecting an incoming call
1 When a call is received, push M.C. down.
Answering a call waiting
1 When a call is received, press M.C.
! You can also perform this operation by push-
ing
M.C. up.
En
11
Section
03
Operating
this
unit
Operating this unit