Initial settings menu, Initial settings menu 06, Chapter 6 – Pioneer DCS-240 User Manual
Page 21: Using the initial settings menu, Video output settings
Initial Settings menu
06
21
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 6
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1
Press
HOME MENU
and select ‘Initial
Settings’.
2
Use the cursor buttons and
ENTER
to
select the setting and option you want to set.
All the settings and options are explained on
the following pages.
1
Video Output settings
Note
1 • In the table, the default setting is shown in
bold
: other settings are shown in
italics
.
• Some settings, such as
TV Screen
,
Audio Language
and
Subtitle Language
may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
•
U.K. model only –
The
AV Connector Out
setting only needs to be set if you have connected this player to your TV using a
SCART cable.
Initial Settings
Setting
Option
What it means
TV Screen
(See also
Screen sizes
and disc formats
on
page 36.)
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
AV Connector Out
U.K. model only
(See
Using the SCART
AV output
on page 29.)
Video
Standard video, compatible with all TVs.
S-Video
Higher quality, but check your TV for compatibility.
RGB
Best quality, but check your TV for compatibility.
Component Out
Australian model only
(See also
Connecting
using the component
video output
on
page 28.)
Interlace
Set if your TV is not compatible with progressive scan video.
Progressive
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). Press
ENTER
once
more to confirm (or
RETURN
to cancel).
Note that progressive scan video is only output from the
component video jacks.
S-Video Out
Australian model only
(See also
Connecting
the S-video output on
page 27
.)
S2
Standard setting.
XV-DV232_240_131.book 21 ページ ２００４年１２月２４日 金曜日 午後５時２１分