Setting the unit – Pioneer PRS-D220 User Manual

Page 4

Text mode
Original mode

Setting the Unit

Power Indicator

The power indicator
lights when the power
is switched on.

Top Cover

Before setting up the unit, unfasten the
screws with a 4 mm hexagonal wrench
and remove the top cover.

Bass Boost Control

You can select a bass boost level from
0, 6, 9 and 12 dB.
For instruction of connecting the bass
boost remote control to the amplifier,
see the “Connection Diagram” section.

BFC (Beat Frequency

Control) Switch

BFC switch is on the bot-
tom of the unit. If you hear
a beat while listening to an
MW/LW broadcast with
your car stereo, change the
BFC switch using a small
standard tip screwdriver.

• To adjust the switch, use standard tip screwdriver if needed.