Pioneer AVH-3400DVD - Manual (Page 54)

Entering PIN code for Bluetooth
wireless connection
(Function of AVH-4400BT/AVH-2400BT)
To connect your Bluetooth device to this unit
via Bluetooth wireless technology, you need to
enter a PIN code on your Bluetooth device to
verify the connection. The default code is
0000, but you can change it with this function.
1 Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 22.
2 Touch PIN Code Input to select
PIN Code Input.
3 Touch 1 to 0 to input pin code.
4 After inputting PIN code (up to 8 di-
gits), store in this unit.
Storing the PIN code in this unit.
Introduction of Theme
setting menu operations
Refer to Basic operations on page 9.
Selecting the illumination color
This unit is equipped with multiple-color illu-
mination.
Direct selection from preset
illumination colors
You can select an illumination color from the
color list.
1 Display the Theme menu.
Refer to Basic operations on page 9.
2 Touch Illumination and then touch a
color on the list.
Customizing the illumination color
1 Display the Theme menu.
Refer to Basic operations on page 9.
2 Touch Illumination and then touch
Custom.
3 Display the customizing menu.
Displaying the customizing menu.
4 Touch the color bar to customize the
color.
5 Touch c or d to fine-tune the color.
6 Touch the icon and hold to store the
customized color in the memory.
Memo Storing the customized color in
the memory.
The customized color has been stored in the
memory.
The set color will be recalled from the memory
the next time you touch the same icon.
En
54
Section
11 Menu operations