Pioneer AVH-3400DVD - Manual (Page 51)

(AVH-4400BT/AVH-3400DVD)
7 Touch Start to start auto EQ.
8 When the 10-second countdown starts,
get out of the car and close the door within
10 seconds.
A measurement tone (noise) is emitted from
the speakers, and auto EQ measurement be-
gins.
When auto EQ is completed,
Complete is dis-
played.
When the car
’s interior acoustic characteris-
tics cannot be measured correctly, an error
message will be displayed. (Refer to Under-
standing auto EQ error messages on page 62.)
# It takes about nine minutes for auto EQ mea-
surement to be completed when all the speakers
are connected.
# To stop auto EQ, touch Stop.
9 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.
10 Press h(eject) to close the panel.
(AVH-4400BT/AVH-3400DVD only)
Favorite menu
1 Display menu columns to register.
Refer to Introduction of menu operations on
page 37.
# You can customize menus except
Video Setup menu.
2 Touch and hold the menu column to
register it.
# To cancel registration, touch and hold the
menu column again.
3 Display the favorite menu and choose a
registered menu.
Refer to Introduction of menu operations on
page 37.
Note
You can register up to 12 columns.
En
51
Section
11
Menu
operations
Menu operations