Pioneer DEH-P77MP - Manual (Page 34)

Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16 you can easily store up to six services for
later recall with the touch of a button.
% When you find a service that you want
to store in memorypress a preset tuning
button 16 and hold until the preset num-
ber stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected service has been stored in mem-
ory.
The next time you press the same preset tun-
ing button 16 the service is recalled from
memory.
Notes
! Up to 18 services, 6 for each of the three
bands can be stored in memory.
! You can also recall services assigned to preset
tuning buttons 16 by pressing
ROTARY ENCODER.
Switching the display
When ensemble is received and service selec-
tion is possible, you can change the display.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
SERVICE (service label)SC LABEL (service
component label)DAB TEXT (dynamic label)
ENSEMBLE (ensemble label)PTY (PTY
label)WTHR ANNC (announcement sup-
port)
Notes
! With a service component that has no service
component lavel, dynamic label or PTY label,
switching to SC LABEL, DAB TEXT and PTY is
not possible.
! When announcement support you have se-
lected is supported by the current service
component, > is displayed on
WTHR ANNC.
Switching the road traffic
flash and transport flash
1 Press TA to turn road traffic flash and
transport flash on.
2 Press TA while the road traffic flash and
transport flash are being received to cancel
the announcement interruption.
Using dynamic label
Displaying dynamic label
1 Press DISPLAY and hold to displaydy-
namic label.
# You can cancel dynamic label display by
pressing DISPLAY or BAND.
# When no dynamic label is currently being re-
ceived, NO TEXT is displayed.
2 Rotate ROTARY ENCODER to recall the
three most recent dynamic label.
Rotate ROTARY ENCODER switches between
the current and the three dynamic label data
displays.
# If there is no dynamic label data in memory
the display will not change.
DAB tuner
En
34
Section
09