Pioneer DEH-P77MP - Manual (Page 21)

Introduction of advanced
built-in CD player operation
1
1 Function display
Shows the function status.
% Press FUNCTION to displaythe function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
REPEAT (repeat play)RANDOM (random
play)SCAN (scan play)PAUSE (pause)
FF/REV (search method)TAG (tag display)
# To return to the playback display, press BAND.
Notes
! When playing audio data (CD-DA), it is not ef-
fective even if you turn TAG (tag display) on.
(Refer to page 28.)
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select REPEAT.
Press FUNCTION until REPEAT appears in the
display.
2 Press ROTARY ENCODER to turn repeat
playon or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
REPEAT:ON (on)REPEAT:OFF (off)
! REPEAT:ON The track currectly playing
will play and then repeat.
! REPEAT:OFF The track currently playing
will continue to play and then play the next
track.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RANDOM.
Press FUNCTION until RANDOM appears in
the display.
2 Press ROTARY ENCODER to turn ran-
dom playon or off.
Press ROTARY ENCODER repeatedly to turn
between the following settings:
RANDOM :ON (on)RANDOM :OFF (off)
! RANDOM :ON Track will play in a random
order.
! RANDOM :OFF Tracks will continue to
play in order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
Built-in CD Player
En
21
English
Section
06