Pioneer PDP-507XA - Manual (Page 46)

46
En
Enjoying through External Equipment 10
Watching a DVD image
Connecting a DVD player
Use the INPUT 2 terminal when connecting to a DVD player
and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, press INPUT 2 on the remote control
unit or press INPUT on the Plasma Television to select INPUT2.
NOTE
• If DVD images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 38.
• Refer to your DVD player operation manual for the signal
type.
Enjoying a game console or watching
camcorder images
Connecting a game console or camcorder
Use the INPUT 5 terminals to connect a game console,
camcorder and other audiovisual equipment.
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or
camcorder, press
INPUT 5 on the remote control unit or press
INPUT on the Plasma Television to select INPUT 5.
NOTE
• The INPUT 5 terminals are checked for cable connections in
the order where; 1) S-Video, 2) Video.
• Connect external equipment to only terminals that are to be
actually used.
Plasma Television (rear view)
SCART cable
(commercially
available)
Component cable
(commercially
available)
When using
component
cable, select
“COMPONENT”
for “Input Select”
in the menu. See
page 38.
At the same time
connect a SCART
cable to input
audio signals.
DVD player
Plasma Television (left side view)
S-Video cable
(commercially available)
Composite video cables
(commercially available)
Game console/Camcorder
PDP507XA.book Page 46 Tuesday, June 20, 2006 1:44 PM