Pioneer VSX-828-S - Manual (Page 3)

3
English
Français
Italiano
Español
Nederlands
Deutsch
Connecting a TV and playback
components
Connecting up (continued)
Connecting antennas
2 1 AM loop antenna
FM wire antenna
VSX-528
HDMI IN
HDMI OUT
VIDEO IN DIGITAL AUDIO OUT
OPTICAL
B
A
HDMI/DVI-compatible TV
VSX-528
HDMI/DVI-compatible
Blu-ray Disc player, etc.
• VSX-423/VSX-323 only: Composite video cable (
A
)
connection is necessary in order to see the OSD of the
unit on the TV.
• VSX-828/VSX-528 only: The OSD will only be output from the
HDMI OUT terminal.
• If the TV does not support the HDMI Audio Return Channel
function, optical digital cable (
B
) connection is required to
listen to the TV sound over the receiver.
• If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an optical
digital cable (
B
). In this case, set ARC at HDMI Setup to
ON  “The HDMI Setup menu” on page 36 (VSX-423/VSX-
323), “HDMI Setup” on page 59 (VSX-828/VSX-528)
• Please refer to the TV’s operation manual for directions on
connections and setup for the TV.