Pioneer AVH-X7500BT - Manual (Page 60)

Displaying the Bluetooth
system version
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the source off.
Refer to Turning the source ON/OFF on page
10.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the sys-
tem menu.
4 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the automatic open
function
Refer to Setting the automatic open function
on page 15.
Setting the safe mode
This setting restricts your operation for
Bluetooth device while driving.
If this mode is set to on, the following opera-
tions are not possible.
! Use of the keyboard function in AppRadio
Mode
! Calling using entering phone number
mode
! All operations in the Bluetooth connection
menu
CAUTION
For your safety, safe mode must always be set
"
On" while driving.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the sys-
tem menu.
3 Touch Safe Mode on the system menu
to turn Bluetooth safe mode on or off.
Setting the rear view
camera (back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (
REAR
VIEW CAMERA IN) when a rear view camera
is installed on your car and the shift lever is
moved to the REVERSE (R) position. (For
more details, consult your dealer.)
You can also switch the rear view image by
pressing the touch panel key.
For details refer to Using the rear view on page
13.
! After you set up the rear view camera set-
ting, move the shift lever to REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
! Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
! To stop watching the rear view camera
video and return to the source display,
press and hold
MUTE.
! Touch the RearView icon to display the
rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source on page 10.
1 Press the home button to switch to the
home display.
En
60
Section
17 System settings