Pioneer N-30-K - Manual (Page 3)

English
Français
Italiano
Español
Nederlands
Deutsch
3
En
Connecting playback component
Connecting to the network throuh the LAN interface
Plugging the unit
Router
R ANALOG OUT L
DIGITAL OUT
OPTICAL COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
LAN (10/100) DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
AC IN
WAN 3 2 1
LAN
Bluetooth adapter
(commercially available)
B-type
R ANALOG OUT L
DIGITAL OUT
OPTICAL COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
LAN (10/100) DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V 0.6A MAX)
AC IN
DIGITAL OUT
COAXIAL
USB
DIGITAL OUT
OPTICAL
CAUTION
•Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie it
with other cables. The power cords should be routed so that
they are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electric shock. Check the
power cord once in a while. If you find it damaged, ask your
nearest Pioneer authorized independent service company
for a replacement.
•Do not use any power cord other than the one supplied with
this unit.
•Do not use the supplied power cord for any purpose other
than that described below.
•The unit should be disconnected by removing the mains
plug from the wall socket when not in regular use, e.g.,
when on vacation.
Only plug in after you have connected all your components to this unit.
1
Plug the supplied power cord into the AC IN socket on the back of the unit.
2
Plug the other end into a power outlet.
To power outlet
AC IN
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by PIONEER
CORPORATION is under license. Other
trademarks and trade names are those of their
respective owners.
Refer to the Operating Instructions in CD-ROM
for instructions on how to connect and setup the
Bluetooth ADAPTER and how to play music.
By connecting this unit to the network via the
LAN interface, you can play back audio files
stored on components on the network, including
your PC, and listen to Internet radio stations.
Connect the LAN terminal on this unit to the
LAN terminal on your router (with or without the
built-in DHCP server function) with a straight
LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your
router. If your router does not have a built-in
DHCP server function, you have to set up the
network manually. For details, see the Operating
Instructions provided on the included CD-ROM.
Internet
Modem
Router
PC
PC A-type
B-type
Digital audio
equipment, etc.
Bluetooth ADAPTER
(commercially available)
To power outlet
(N-50 only) (N-50 only)
Digital audio
equipment, etc.
(N-50 only)