Buhler 65 Series - Manual (Page 29)

65 Series Rotary Tiller
29
TROUBLE SHOOTING
The Buhler Farm King 65 Series Rotary Tiller moves curved Tines on a turning rotor
through the ground to break it up and prepare a seed bed. It is a simple and reliable
system that requires minimal maintenance.
In the following section, we have listed many of the problems, causes and solutions to
the problems that you may encounter.
If you encounter a problem that is difficult to solve, even after having read through this
trouble shooting section, please call your local Buhler Farm King distributor dealer.
Before you call, please have this Operator's Manual and the serial number from your
Tiller ready.
PROBLEM
CAUSE SOLUTION
Rotor won't
Slip clutch slipping. Check that clutch is engaged
turn. or replace friction plates. or replace friction plates.
PTO clutch slipping. Set PTO clutch. See
tractor manual.
Broken drive chain. Repair or replace chain.
****
Untilled 3 point hitch not set. Set 3 point hitch in
ground behind float. See tractor
machine. manual.
Traveling too fast. Travel slower.
Ground very hard. Slow down. Make
2 passes.
Machine not leveled. Adjust screw jack
on 3 point arm.
Adjust Depth Gauge
Shoes.
****
Seed bed lumpy. Traveling too fast. Slow down.
Make 2 passes.
****
Uneven seed bed. Machine not level. Level machine.
Drag Shield too high. Adjust Drag Shield.