Buhler 65 Series User Manual
Page 16
65 Series Rotary Tiller
16
ATTACHING/UNHOOKING – cont’d.
9.
Attach the PTO driveline:
a.
Check that the driveline telescopes easily and that the shield rotates
freely.
CAUTION: Be sure that the driveline does not bottom out when going
through its working angles.
b.
Attach the driveline to the tractor by retracting the locking pin, slide the
yoke over the shaft and push on the yoke until the lock pin clicks into
position. Pull on the yoke to be sure it is locked in position.
c.
Attach the anchor chain on the driveline shield to the frame.
10.
Use the 3 point hitch to raise the machine.
11.
Unpin the front frame stand. Raise and pin in its storage position.
12.
Remove the blocks from under the Depth Gauge Shoes.
13.
Reverse the above procedure when unhooking from the tractor.