Pioneer VSX-D1011-S - Manual (Page 50)

Basic Operation
50
En
memo
DVD-Audio/MULTI CHANNEL IN Playback
MULTI CH IN allows you to connect a DVD-Audio player or an external decoder to enjoy certain multichannel
discs. To use MULTI CH IN playback follow the instructions below.
1 Press the MULTI CH INPUT button on
the remote control or the MULTI CH
IN button on the front panel.
Each press switches the input between the previous
mode and MULTI CH IN.
ON: This is a true playback of the signal from the
MULTI CH INPUT terminals, output without digital
processing. You can only control each channel level.
OFF: Cancels the MULTI CH IN modes.
1
SOURCE
MULTI CONTROL
RECEIVER
MOVIE MUSIC
ENTER
MULTI
OPERATION
SURROUND
MODE
STEREO/
DIRECT
SYSTEM
OFF
ACOUSTIC
EQ
SB CH
MODE
INPUT
MIDNIGHT
MUTE
MULTI CH
INPUT
MASTER
VOLUME
DVD/LD
VCR 2
TV / SAT
C D
VCR1/DVR TV CONT
TUNER RECEIVER
1
STEREO/DIRECT MULTI CH IN
MASTER VOLUME
ACOUSTIC EQ
VSX-D1011 AUDIO/VIDEO MULTI-CHANNEL RECEIVER
Listening in HI–BIT/SAMPLING Mode
Use to hear CD and DVD, as well as other digital soundtracks, at a wider dynamic range, allowing for finer audio
reproduction.
1 Press RECEIVER.
2 Press the HI–BIT button on the
remote control or HI-BIT HI-
SAMPLING button on the front
panel.
Each press switches HI-BIT/SAMPLING mode on or off.
HI-BIT/SAMPLING lights in the display.
SOURCE
MULTI CONTROL
RECEIVER
MOVIE MUSIC
MULTI
OPERATION
SYSTEM
OFF
ACOUSTIC
EQ INPUT
DVD/LD
VCR 2
TV / SAT
C D
VCR1/DVR TV CONT
TUNER RECEIVER
1
+−
SIGNAL SEL BASS/TREBLE DISC DNR
VIDEO SEL
SUB TITLE
REMOTE
SETUP
HI-BIT
TV CONTROL
CHANNEL VOLUME INPUT
SELECT
+ 10
RECEIVER
ENTER
2
PHONES SPEAKERS
SIGNAL
SELECT SB CH
MODE EON MODE CHARACTER/ SEARCH HI-BIT HI-SAMPLING
S-VIDEO VIDEO
VIDEO INPUT
AUDIO L R
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
CLASS BAND
STATION TUNING
MULTI JOG/ENTER
MULTI JOG CONTROL
SELECT
TUNER
EDIT
2
• HI–BIT mode cannot be set on MULTI CH IN mode.
• If the receiver is in DIRECT mode and you press the
HI–BIT button the receiver will switch to STEREO
mode.
• This feature can’t be used with 96 kHz and 88.2 kHz
sources.
• You can’t use any kind of sound processing with MULTI
CH IN. Selecting a listening mode, or switching these
modes, cancels the MULTI CH IN.
• If any other speakers are set to NO the signal for that
(those) channel(s) won’t get output at all.
• You cannot set sound features (pages 47–49) on, in
MULTI CH IN mode.
• You cannot listen to the SECOND ZONE in MULTI CH
IN mode.
• If you’re listening to DVD-Audio but can only get stereo
sound set your DVD player’s 5.1 channel analog
playback to on.
memo