Pioneer AVIC-F9310BT - Manual (Page 145)

3 Touch the colour you want.
Available options:
! Coloured keys: Selects the desired preset
colour
! Memory 1/Memory 2: Colours registered
in the memory
= For details, refer to Creating a user-de-
fined colour and storing it to memory on
this page.
! Scan: Shifts between the eight default col-
ours in sequence gradually.
! Eco: The colours change in the order of
white, red, amber, yellow, green, and blue
as the number of points in the
“Eco Score”
increases.
p The illumination lights in white when
“Eco Score” is set to “Off” or when no
route is set.
Creating a user-defined colour and
storing it to memory
You can create a user-defined colour and set it
as the illumination colour.
1 Display the
“System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 139.
2 Touch [Illumi Color].
The
“Illumination Color” screen appears.
3 Touch [Custom].
The
“Illumination Color” screen appears.
p If [Scan] is set, [Custom] cannot be se-
lected.
4 Touch [+] or [ –] to adjust the values for
Red, Green and Blue to create a favourite
colour.
Watch the illumination of hardware keys while
adjusting the colour.
Each time you touch [
+] or [
–] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be stored with all of the va-
lues set to
“+00”.
5 Touch [Memory 1] or [Memory 2] to
store the illumination colour.
6 Touch [OK] to return to the previous
screen.
Checking the version information
1 Display the
“System Settings” screen.
= For details, refer to Displaying the screen for
system settings on page 139.
2 Touch [Service Information].
The
“Service Information Screen” screen ap-
pears.
3 Check the version information.
Reversing the climate control
status display
If the left/right display of the climate control
status screen does not match that of vehicle,
the display can be reversed.
p To configure this setting, the optional Vehi-
cle Bus adapter must be connected.
Engb
145
Chapter
26
Customising
pr
eferences
Customising preferences