Pioneer AVIC-F9210BT - Manual (Page 24)

21 Touch [Yes].
Update starts.
22 Wait until the upgrade process is com-
plete.
A message will appear after the update is
complete.
23 Touch [OK].
The message disappears, and the map screen
returns.
24 Eject the upgrade microSD card #2
(2 GB).
Update is completed.
Updating the Bluetooth
wireless technology software
p Customers updating the Bluetooth firm-
ware of AVIC-F10BT for the first time should
refer to Updating the Bluetooth wireless
technology software (for AVIC-F10BT) on
page 22.
Access the Pioneer website to check your
phone
’s compatibility. If your phone is on the
list and you wish to update, manually update
the Bluetooth firmware after the automatic up-
grade is finished.
http://www.pioneer.eu
CAUTION
! Be sure to upgrade your navigation system
first.
! Be careful to follow the update procedure cor-
rectly. If you make a mistake, Bluetooth wire-
less technology functions will become
unavailable.
p Consult your authorised dealer if you are
unable to use Bluetooth wireless technol-
ogy functions.
! Be sure to complete the Bluetooth firmware
update procedure without interruption.
p Registered phones that are listed on the
“Connection List” screen are cleared by
the software update.
1 Insert the upgrade microSD card #2
(2 GB) into the SD card adapter.
p Step 1 is not necessary for AVIC-F920BT,
AVIC-F9210BT and AVIC-F9220BT.
Engb
24
Chapter
05 Instructions for upgrading