Pioneer AVH-P6600DVD - Manual (Page 5)

English
Español
Deutsch
Français
Italiano
Nederlands
Fig. 2
4
Parking brake
switch
Power supply side
Ground side
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC). Blue/white (6*)
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Antenna jack Violet
Black
1.5 m
Antenna cable (supplied)
2 m
26 pin cable (supplied)
21 pin cable (supplied)
Hide-away unit
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Connection method
Clamp the lead. 1. 2. Clamp firmly with
needle-nosed
pliers.
Jack for Wired Remote Control
Please see the Instruction Manual for the
Wired Remote Control (sold separately).